Country / Region

H3C S6300 Series Data Center Switches

H3C S6300 series are self-developed Data Center switches with high-density 10GE ports. As a part of H3C’s VCF (Virtual Converged Framework), S6300’s innovative architecture simplifies Data Center’s network, provides flexible programmed capability and a rich set of features for Data Center, all packed in the standard 1U with multiple 10GE and 40GE uplink ports. S6300 series is positioned as a high-density 10GE and low-delay TOR “Top of Rack” access switch in the next generation data center and cloud computing network.

Models in S6300 Series:

* S6300-52QF: 48*1/10G SFP Plus +4*QSFP+ (each QSFP+ (40G) can be used as 4*10G SFP), Dual power supply slots, Dual fans slots;

* S6300-42QF: 40*1/10G SFP Plus +2*QSFP+ (each QSFP+ (40G) can be used as 4*10G SFP), Dual power supply slots, Dual fans slots;

* S6300-48S: 48*1/10G SFP Plus, Dual power supply slots, Dual fans slots;

* S6300-42QT: 32*1/10G BASE-T+8*1/10G SFP Plus +2*QSFP+ (each QSFP+ (40G) can be used as 4*10G SFP), Dual power supply slots, Dual fans slots;

Learn more Show less
S6300-52QF Front View
S6300-52QF Front View
S6300-52QF Rear View
S6300-52QF Rear View
S6300-42QF Front View
S6300-42QF Front View
S6300-42QF Rear View
S6300-42QF Rear View
S6300-48S Front View
S6300-48S Front View
S6300-48S Rear View
S6300-48S Rear View
S6300-42QT Front View
S6300-42QT Front View
S6300-42QT Rear View
S6300-42QT Rear View
  • Features
  • Specification
  • Ordering Information
  • Resources
  • Software

Features

High-Density 10GE Ports

As client side network bandwidth grows, 10GE adapters are increasingly common in servers, switches have to deliver a higher forwarding performance and provide more 10GE expansion space. S6300-52QF features 48 SFP+ optical ports and 4*40G QSFP ports, S6300-42QF features 40 SFP+ optical ports, and 2*40G QSFP ports, S6300-48S features 48 SFP+ optical ports and S6300-42QT features 32 10G Base-T ports, 8 SFP+ optical ports and 2*40G QSFP ports. Each 40G QSFP port can run as a single 40G port or 4 10GE ports with conversion cables.

Intelligent Resilient Framework 2 (IRF2)

S6300 series is pre-built with Intelligent Resilient Framework 2 (IRF2). IRF2 provides the following benefits:

* High scalability: With IRF2, plug-n-play device aggregation can be achieved by adding one or more switches into the IRF2 stack and enabling IRF2 stacking on the new device. New devices can be managed with a single IP, and upgraded at the same time to reduce network expansion cost.

* High reliability: The IRF2 patented 1:N backup technology allows each slave device in the IRF2 stack to serve as the backup of the master, creating control and data link redundancy, as well as uninterrupted layer-3 forwarding. This improves the reliability, avoids unplanned business downtime and serves to improve overall performance. When the master device fails, traffic remains uninterrupted.

* Load balancing: IRF2 supports cross-device link aggregation, upstream and downstream can be connected to more than one physical link, which creates another layer of network redundancy and boosts the network resource utilization.

* Availability: H3C Implements IRF2 through standard Forty Gigabit Ethernet (40GE) or Ten Gigabit Ethernet (10GE) ports which allocates bandwidth for business and application access and reasonably splits local traffic and upstream traffic. IRF2 rules can not only be obeyed within and across the rack, but also across the LAN.

Data Center-Oriented Features

* S6300 series adopts the modular dual power supply and dual fans design, both supporting hot plug-in and pull-out. With the modular software platform, the software function modules can be added and deleted flexibly according to requirements. Through exquisite physical structure and software process optimization, the end-to-end packet processing latency is greatly reduced, which is on 10GE/40GE ports less than 1us, 20% less than average in the industry.

* S6300 series supports EVB (Edge Virtual Bridging) and uploads data traffic generated on VMs (Virtual Machines) to switches connected with servers for processing via VEPA (Virtual Ethernet Port Aggregation), not only forward traffic between VMs, but solve problems of connection and management boundary between VMs and network.

* FCoE technology leverages Ethernet packet to carry FC traffic, so that FC SAN can share the same network with Ethernet LAN to solve coexistence problems of different types of networks. S6300 switch series supports full FCoE and FC protocol stack.

* TRILL (Transparent Interconnection of Lots of Links) is an innovative technology that changes the traditional way to build data center networks. It introduces benefits of layer 3 routing technology, such as stable, scalable and high performance into layer 2 switching network (traditional limited performances and network scenario) to make Layer 2 network more flexible, extensible, and high-performance. It is an ideal choice for S6300 switch series with TRILL to build a large scale, high-performance, and extensible cloud Data Center networks that which supports VMs dynamic migration.

* SDN (Software Defined Network) is an innovative network framework that simplifies network management and reduces maintenance complexity with the core technology of OpenFlow which separates control plane from forwarding layer. It also controls traffic flexibly and provide a well-defined network platform for core network application and innovation.

* S6300 switch series supports DCB (Data Center Bridging), ISSU (In-service Software Upgrade), OAM (Operations, Administration and Maintenance) and Energy-Efficient Ethernet (EEE). It fully satisfies Data Center’s requirements of high performance, easy management and green energy saving.

Flexible Choice of Airflow

* To cope with data center cooling aisle design, H3C S6300 series comes with flexible airflow design, which features bi-cooling aisles in front and back. Users may also choose the direction of airflow (from front to back or vice versa) by selecting a different fan tray.

Outstanding Security Control Policies

* H3C S6300 series supports AAA, RADIUS and user account based authentication, IP, MAC, VLAN, port-based user identification, dynamic and static binding; when working with the H3C iMC platform, it can conduct real time management, instant diagnosis and crackdown on illicit network behavior.

* H3C S6300 series supports enhanced ACL control logic, which supports an enormous amount of in-port and out-port ACL, and delegate VLAN based ACL. This simplifies user deployment process and avoids ACL resource wastage.

Multiple Reliability

* H3C S6300 series provides multiple reliability functions at both box and link levels, with over current, overvoltage, and overheat protection.

* All models have a redundant pluggable power module, which enables flexible configuration of AC or DC power modules based on actual needs. The entire switch supports fault detection and alarm for power supply and fan, allowing fan speed to change to suit different ambient temperatures.

Excellent Manageability

* H3C S6300 series supports rich management interfaces, including console, out of band management and USB Management protocols such as SNMPv1/v2/v3, iMC Intelligent Management Center) also supported. The network administrator may activate control through CLI, Web interface and TELNET which gives maximum flexibility in accessing and managing the device. SSH2.0 and SSL encryption can also be used to protect the management session.

Specification

Features

S6300-52QF

S6300-48S

S6300-42QF

S6300-42QT

Dimensions (W × D × H)

440×460

×43.6mm

440×460

×43.6mm

440×460

×43.6mm

440×660

×43.6mm

Weight

≤10kg

≤10kg

≤ 10kg

≤ 10kg

Flash/SDRAM

512MB/2GB

Console port

1

Ethernet port for management

1

USB port

1

10G Base-T port

0

0

0

32

SFP Plus

48

48

40

8

QSFP(40GE)

4

0

2

2

Input Voltage

AC

Rated voltage range: 100V to 240V AC, 50/60Hz Maximum voltage range: 90V to 264V AC, 47/63Hz

DC

Rated voltage range: -40V to -60V DC; Maximum voltage range: -40V to -72V DC

Fan

Hot-swappable fan, fan speed adjustable and wind invertible

Power consumption

(in full configuration)

250W

230W

240W

370W

Operating temperature

0oC~45oC

Operating relative humidity

(non-condensing)

10%~90%

Port Switching Capacity

1.28Tbps

0.96Tbps

0.96Tbps

0.96Tbps

Forwarding performance

960Mpps

720Mpps

720Mpps

720Mpps

Forwarding mode

Store-forward and cut-through

Horizontal Virtualization

Intelligent Resilient Framework 2 (IRF2)

Distributed device management, distributed link aggregation, distributed resilient routing

Stacking through standard Ethernet port

Local and remote stacking

LACP, BFD and ARP based MAD stacking collision inspection mechanism

Link aggregation

10GE port aggregation

40GE port aggregation

static aggregation, dynamic aggregation

Data center features

VEPA 802.1Qbg

802.1Qbb PFC, 802.1Qaz ETS, ECN

FCoE Packet Transparent Pass through

T11 standards-compliant FCoE (FC-BB-5)

Fibre Channel forwarding (FCF)

N-Port Virtualization (NPV) technology

N-port identifier virtualization (NPIV)

Standard zoning

Fibre Channel ping

TRILL

TRILL & IRF

Jumbo Frame

Support

MAC address table

Static MAC address

Blackhole MAC address

Can configure maximum number of port MAC address learned

VLAN

Port-based VLAN (4094 items)

Default VLAN

QINQ and Flexible QINQ

VLAN MAPPING

PVST+, RPVST+

Traffic monitoring

Support sFlow

DHCP

DHCP Client

DHCP Snooping

DHCP Relay

DHCP Server

DHCP Snooping option82/DHCP Relay option82

ARP

Static table entry

Gratuitous ARP

Standard proxy ARP and local proxy ARP

Dynamic ARP Inspection

ARP anti-attack

ARP source suppression

ARP Detection function (check according to DHCP Snooping safety entry, 802.1x table entry or IP/MAC static binding table entry)

Routing

IPv4, IPv6 Static routing, RIP v1/2 and RIPng

ECMP, VRRP, OSPFv1/v2/v3, BGP

Multicast protocol

IGMP Snooping v2/v3

IGMP Snooping Fast-leave

IGMP Snooping Group-policy

PIM snooping

MSDP

MVRP

MFF

IPv6 PIM snooping, IPv6 multicast VLAN, IPv6 PIM

Zero configuration

Zero-touch configuration based on DHCP Auto-config or CWMP-TR069

Broadcast / Multicast / Unicast storm suppression

Port rate percentage based

PPS-based

BPS-based

MSTP

STP/RSTP/MSTP

STP Root Guard

Root Protection, Loop Protection, Edge Port/BPDU Guard

BPDU Guard

QoS/ACL

Flow control

Committed Access Rate (CAR)

8 output queues per port

Flexible queue scheduling algorithm can be set based on port and queue, support SP, WDRR, WRR, WFQ, SP + WDRR and other models

802.1p and DSCP priority re-marking

L2 (Layer 2) ~ L4 (Layer 4) packet filtering based on source MAC address, destination MAC address, source IP (IPv4/IPv6) address, destination IP (IPv4/IPv6) address, port, protocol, and VLAN Traffic Classification

Time range

Weighted Random Early Detection (WRED)

Mirror

Flow Mirroring

N: 4 port mirroring

Local and remote port mirroring

Security features

Hierarchical user management and password protection

ARP packet rate limit, ARP attack protection

Centralized MAC authentication

802.1X

Storm constrain

AAA authentication

RADIUS authentication

HWTACACS

SSH 2.0

Port isolation

IP + MAC + port binding

IP Source Guard

HTTPs

SSL

Public Key Infrastructure (PKI)

Firmware upgrade

Upgrade via the XModem, File Transfer Protocol (FTP) and Trivial File Transfer Protocol (TFTP)

Management and maintenance

Configuration via CLI, Telnet, and Console port

Schedule job

ISSU

802.1ag and 802.3ah

SNMPv1/v2c/v3(Simple Network Management Protocol)

H3C Intelligent Management Centre (iMC)

System log

hierarchical alarm

NTP

Power, fan and temperature alarms

Debug string output

Ping, Tracert

Track

Telnet remote maintenance

Copy switch files to and from a USB flash drive

EMC

FCC Part 15 Subpart B Class A

ICES-003 CLASS A

VCCI CLASS A

CISPR 22 CLASS A

EN 55022 CLASS A

AS/NZS CISPR22 CLASS A

CISPR 32 CLASS A

EN 55032 CLASS A

AS/NZS CISPR32 CLASS A

CISPR 24

EN 55024

EN 61000-3-2

EN 61000-3-3

ETSI EN 300 386

GB/T 9254

YD/T993

Safety

UL 60950-1

CAN/CSA C22.2 No 60950-1

IEC 60950-1

EN 60950-1

AS/NZS 60950-1

FDA 21 CFR Subchapter J

GB 4943.1

Ordering Information

Product ID

Product Description

LS-6300-52QF

H3C S6300-52QF L2 Ethernet Switch with 48 XG Ports and 4 QSFP Plus Ports,No Power

LS-6300-48S

H3C S6300-48S L2 Ethernet Switch with 48 XG Ports,No Power

LS-6300-42QF

H3C S6300-42QF L2 Ethernet Switch with 40 XG Ports and 2 QSFP Plus Ports,No Power

LS-6300-42QT

H3C S6300-42QT L2 Ethernet Switch with 32 XGT Ports,8 XG Ports and 2 QSFP Plus Ports,No Power

Power supply

LSVM1AC650

650W AC Power Supply Module (only for S6300-42QT )

LSVM1DC650

650W DC Power Supply Module (only for S6300-42QT )

LSVM1AC300

300W AC Power Supply Module (for 52QF/48S/42QF )

LSVM1DC300

300W DC Power Supply Module (for 52QF/48S/42QF )

Fans

LSWM1HFANSCB

Fan Module with Port to Power Airflow (only for S6300-42QT )

LSWM1HFANSC

Fan Module with Power to Port Airflow (only for S6300-42QT )

LSWM1FANSC

Fan Module with Power to Port Airflow (for 52QF/48S/42QF )

LSWM1FANSCB

Fan Module with Port to Power Airflow (for 52QF/48S/42QF )

Transceivers

SFP-GE-T

1000BASE-T SFP

SFP-GE-SX-MM850-A

1000BASE-SX SFP Transceiver, Multi-Mode (850nm, 550m, LC)

SFP-GE-LX-SM1310-A

1000BASE-LX SFP Transceiver, Single Mode (1310nm, 10km, LC)

SFP-GE-LH40-SM1310

1000BASE-LH40 SFP Transceiver, Single Mode (1310nm, 40km, LC)

SFP-GE-LH40-SM1550

1000BASE-LH40 SFP Transceiver, Single Mode (1550nm, 40km, LC)

SFP-GE-LH80-SM1550

1000BASE-LH80 SFP Transceiver, Single Mode (1550nm, 80km, LC)

SFP-XG-SX-MM850

SFP+ Module(850nm,300m,LC)

SFP-XG-LX-SM1310

SFP+ Module(1310nm,10km,LC)

QSFP-40G-LR4-WDM1300

40GBASE-LR4 QSFP+ Optical Transceiver Module

QSFP-40G-CSR4-MM850

QSFP+ 40GBASE Optical Transceiver Module (850nm,300m,CSR4,Support 40G to 4*10G)

QSFP-40G-SR4-MM850

QSFP+ 40GBASE Optical Transceiver Module (850nm,100m,SR4,Support 40G to 4*10G)

Cables

LSWM1STK

SFP+ Cable 0.65m

LSWM2STK

SFP+ Cable 1.2m

LSWM3STK

SFP+ Cable 3m

LSTM1STK

SFP+ Cable 5m

LSWM1QSTK0

40G QSFP+ Cable 1m

LSWM1QSTK1

40G QSFP+ Cable 3m

LSWM1QSTK2

40G QSFP+ Cable 5m

LSWM1QSTK3

40G QSFP+ to 4x10G SFP+ Cable 1m

LSWM1QSTK4

40G QSFP+ to 4x10G SFP+ Cable 3m

LSWM1QSTK5

40G QSFP+ to 4x10G SFP+ Cable 5m

Cables

LIS-S5820V2-DC

Data Center License

FCoE, FC, SPB, Trill, EVB require a software license. Only one license is required even if multiple features are installed on the switch.

Resources

Software

六合图库宝典