Country / Region

H3C S5560S-SI Series Standard Gigabit Switches

H3C S5560S-SI is the latest development of Gigabit Layer 3 access switch. It’s the second generation intelligent managed switches designed for networks requiring high performance, high port density, high uplink bandwidth and easy to use.

H3C S5560S-SI series switch offers Gigabit connectivity with10/100/1000 autosensing ports and 1G or 10G optical ports.

H3C S5560S-SI series switch includes four models as follows:

  • S5560S-28P-SI: 24*10/100/1000TX Ethernet ports + 4*SFP ports;
  • S5560S-52P-SI: 48*10/100/1000TX Ethernet ports + 4*SFP ports;
  • S5560S-28S-SI: 24*10/100/1000TX Ethernet ports + 4*SFP+ ports;
  • S5560S-52S-SI: 48*10/100/1000TX Ethernet ports +4*SFP+ ports;
Learn more Show less
H3C S5560S-SI
H3C S5560S-SI
  • Features
  • Specification
  • Ordering Information
  • Resources
  • Software

Features

High scalability

H3C S5560S-SI switch series offers fixed 4-port 10GE or 4-port GE uplink ports which offers high cost effective GE/10GE uplink with high density Gigabit access, protecting customer’s investigation.

H3C S5560S-SI switch series supports Intelligent Resilient Framework 2 (IRF2), which can stack 9 models as one logical device, offering high scalability and flexibility.

IPV6 features

The S5560S-SI switch series comes with IPv4/IPv6 dual-stack platform which provides hardware-based IPv4/IPv6 wire-speed forwarding and IPv4/IPv6 Layer 3 routing protocols. It also supports IPV6-based ACL, QOS, multicasting and NMS that can help the network upgrade from IPV4 to IPV6.

Intelligent Resilient Framework 2 (IRF2)

H3C S5560S-SI switch series is pre-built with Intelligent Resilient Framework 2 (IRF2). IRF2 provides the following benefits:

  • High scalability: With IRF2, plug-n-play device aggregation can be achieved by adding one or more switches into the IRF2 stack and enabling IRF2 stacking on the new device. New devices can be managed with a single IP, and upgraded at the same time to reduce network expansion cost.
  • High reliability: The IRF2 patented 1: N backup technology allows each slave device in the IRF2 stack to serve as the backup of the master, creating control and data link redundancy, as well as uninterrupted layer-3 forwarding. This improves the reliability, avoids unplanned business downtime and serves to improve overall performance. When the master device fails, traffic remains uninterrupted.
  • Load balancing: IRF2 supports cross-device link aggregation, upstream and downstream can be connected to more than one physical link, which creates another layer of network redundancy and boosts the network resource utilization.
  • Availability: H3C Implements IRF2 through standard Gigabit Ethernet (1GE) ports or Ten Gigabit Ethernet (10GE) ports which allocates bandwidth for business and application access and reasonably splits local traffic and upstream traffic. IRF2 rules not only able to obey within and across the rack, but also across the LAN.

Comprehensive security control policies

  • H3C S5560S-SI switch series supports innovative single-port multi-authentication function, the access authentication modes supported by different clients are different. For example, some clients can only perform MAC addresses Authentication (such as the printer terminal), and some user host for 802.1X authentication, and some user hosts only want to access through the Web portal authentication. In order to flexibly adapt to the multi-authentication requirements of the network environment, the S5560S-SI switch series support single-port multi-authentication unified deployment.
  • ARP attack and ARP virus are major threats to LAN security, so the S5560S-SI switch series comes with diverse ARP protection functions such as ARP Detection to challenge the legitimacy of client, validate the ARP packets, and set a speed limit for ARP to prevent ARP swarm attacks from targeting CPU.
  • H3C S5560S-SI switch series support EAD (End User Admission Domination) function. Once working with the iMC (intelligent Management Centre) system, EAD integrates terminal security policies, such as anti-virus and patch update, into network access control and access right control policies to form a cooperative security system. By checking, isolating, updating, managing, and monitoring access terminals, EAD changes passive, single point network protection to active, comprehensive network protection, and changes separate management to centralized management, enhancing the network capability for preventing viruses, worms, and new threats.

Abundant QoS policies

  • The S5560S-SI switch series supports packet filtering at Layer 2 through Layer 4, and traffic classification based on source MAC addresses, destination MAC addresses, source IP addresses, destination IP addresses, TCP/UDP port numbers, protocol types, and VLANs. It supports flexible queue scheduling algorithms based on ports and queues, including strict priority (SP), weighted round Robin (WRR) and SP+WRR. The S5560S-SI switch series enables committed access rate (CAR) with the minimum granularity of 8 kbps. It supports port mirroring in the outbound and inbound directions, to monitor the packets on the specific ports, and to mirror the packets to the monitor port for network detection and troubleshooting.

Excellent manageability

  • The H3C S5560S-SI switch series makes switch management with ease with the support of SNMPv1/v2/v3, which can be managed by NM platforms, such as Open View and iMC. With CLI and Telnet switch management is made easier. And with SSH 2.0 encryption, switch management security is enhanced.

High Availability

The switch offers the following hardware high availability features:

  • Automatically monitors power module and fan tray status, and generates alarms when a power or temperature event occurs.
  • Adjusts fan speed based on the change in temperature.
  • Self-protection mechanisms that protect power modules against overcurrent, overvoltage, and overtemperature conditions.
  • In addition to hardware redundancy, the switch provides a variety of node and link redundancy and protection mechanisms,

including:

  • Ethernet link aggregation, including LACP.
  • Spanning tree protocols, including STP, RSTP and MSTP.
  • IRF 2 in daisy or ring topology in conjunction with multichassis link aggregation

Specification

Item

S5560S-28P-SI

S5560S-52P-SI

S5560S-28S-SI

S5560S-52S-SI

Switching capacity

56Gbps

104Gbps

128Gbps

176Gbps

Packet forwarding rate

42Mpps

78Mpps

96Mpps

132Mpps

Dimensions (H × W × D)

43.6 × 440 × 160 mm

43.6 × 440 × 230 mm

43.6 × 440 × 160 mm

43.6 × 440 × 230 mm

Weight

< 2.5 kg

< 3.5 kg

< 2.5 kg

< 3.5 kg

Management Ethernet ports

1 console port

Service ports

24 × 10/100/1000Base-T autosensing Ethernet ports

4 × SFP ports

48 × 10/100/1000Base-T autosensing Ethernet ports

4 × SFP ports

24 × 10/100/1000Base-T autosensing Ethernet ports

4 × 10G SFP+ ports

48× 10/100/1000Base-T autosensing Ethernet ports

4 × 10G SFP+ ports

Power consumption

MIN: AC 9W

MAX: AC 23W

MIN: AC 18W

MAX: AC 41W

MIN: AC 10W

MAX: AC 24W

MIN: AC 19W

MAX: AC 44W

Operating temperature

0oC to 45oC (32°F to 113°F)

Operating humidity

10% RH to 90% RH, non-condensing

Link aggregation

1G/10G port aggregation

Static aggregation

Dynamic aggregation

Multichassis link aggregation

Jumbo frame

Supported

MAC address table

Blackhole MAC address

MAC learning limit

Flow control

802.3x flow control and half-duplex backpressure

VLAN

Port-based VLAN

QinQ

Voice VLAN

MAC VLAN

ARP

ARP Detection

ARP speed limit

ND

Supported

VLAN virtual port

Supported

DHCP

DHCP Client

DHCP Snooping

DHCP Relay

DHCP Server

DHCP Option82

DNS

Static and Dynamic DNS

IPV4 and IPV6

Routing protocols

IPV4/IPV6 static routing

RIP/RIPng, OSPFV1/V2/V3

Strom suppression

Storm suppression based on port bandwidth percentage

Storm suppression based on PPS

Layer 2 ring network protocol

STP/RSTP/MSTP

STP Root Protection

Smart Link

RRPP

Mirroring

Flow mirroring

Port mirroring

QoS/ACL

Packet filter

Flexible queue scheduling algorithms based on ports and queues, including SP, WRR and SP+WRR

Bidirectional ACL

Port-based speed limit

Flow redirection

Time-range

Layer 2 ring network protocol

STP/RSTP/MSTP

STP Root Protection

Smart Link

RRPP

Security

Hierarchical user management and password protection

MAC-based authentication

802.1X

SSH2.0

Port isolation

IP source guard

HTTPs

EAD

Loading and upgrading

Loading and upgrading through FTP/TFTP

Management and maintenance

Configuration from CLI

Login through Telnet, and the console port

Simple Network Management Protocol (SNMP)

Remote Monitoring (RMON)

IMC network management system

WEB management

System log

Alarming based on severity

IRF

NTP

Debugging information output

Telnet-based remote maintenance

NQA

DLDP

Virtual Cable Test

Ordering Information

Product ID

Product Description

LS-5560S-28P-SI-GL

H3C S5560S-28P-SI L2 Ethernet Switch with 24*10/100/1000BASE-T Ports and 4*1000BASE-X SFP Ports,(AC)

LS-5560S-52P-SI-GL

H3C S5560S-52P-SI L2 Ethernet Switch with 48*10/100/1000BASE-T Ports and 4*1000BASE-X SFP Ports,(AC)

LS-5560S-28S-SI-GL

H3C S5560S-28S-SI L2 Ethernet Switch with 24*10/100/1000BASE-T Ports and 4*1G/10G BASE-X SFP Plus Ports,(AC)

LS-5560S-52S-SI-GL

H3C S5560S-52S-SI L2 Ethernet Switch with 48*10/100/1000BASE-T Ports and 4*1G/10G BASE-X SFP Plus Ports,(AC)

Resources

Software

六合图库宝典